7 Series E65 745d (M67TU) SAL
Remove special tool 11 8 120 .
Remove special tool 11 5 180 .
Using special tool 11 6 480 , crank engine at vibration damper in
direction of rotation through 720
°
.
Installation:
Screw (3) on sprocket wheel screw connection can now be
inserted.
Tightening torque: 11 31 1AZ
.
Insert special tool 11 5 180 into alignment bore on flywheel.
RA Replacing both left camshafts (M67TU)
BMW AG - TIS
12.02.2013 13:29
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 7 -