7 Series E65 745d (M67TU) SAL
Release expansion rivets (1).
Lever out catches (3) and detach trim (2) in direction of arrow.
Disconnect plug connection under luggage compartment light (4)
and remove trim (2).
Installation:
If necessary, replace faulty clips (1) on trim (3) for rear lid at
bottom.
Replacement:
•
Remove luggage compartment light
If necessary, remove frame (2) of switch for automatic rear lid
operation or cover for rear lid button.
If necessary, replace clip for handle of manual rear lid unlocking.
RA Removing and installing/replacing trim for lower rear lid
BMW AG - TIS
12.02.2013 23:08
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -