7 Series E65 745i (N62) SAL
11 61 050
Removing and installing intake air manifold
(N62)
Remove acoustic cover.
Remove design cover.
Remove center of bulkhead.
Remove intake hose.
Remove injection pipe.
On rear side of manifold, unlock and disconnect plug on
differential pressure sensor and on servomotor.
Unlock and detach vent hose (1).
Remove cable from holder.
Unfasten screws.
Remove intake air manifold (2) upwards with aid of a second
person.
Installation:
Clean sealing faces (1) on intake air manifold (2).
RA Removing and installing intake air manifold (N62)
BMW AG - TIS
14.02.2013 03:43
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -