bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

12 RA Removing And Installing Or Replacing Inside Door Opener In Left Or Right Front D > < 11 RA Removing And Installing Or Replacing Outside Handle From Left Or Right Front Doo
Page 2
background image

Push lockplate (2) forwards again slightly until resistance

can be felt.

Outside door handle must be locked.

Important!

A fibre optic waveguide is connected to outside door handle.

Comply notes and instructions on handling fibre optic cables.

Note:

No fibre optic waveguide is fitted from build date 09/2004.

Lever out outside door handle at bottom towards top and pull out
at an angle towards bottom.

If necessary, cover outside of door.

Detach clip (1) and remove fiber optics cable (2) from outside
door handle.

If necessary, disconnect further plug connection.

Important!

For further tasks, protect optical waveguide connection
against damage and contamination (masking/fabric/insulating
tape).

RA  Removing and installing or replacing outside handle from left or right front doo

BMW AG - TIS

14.02.2013  23:13

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 2 -

12 RA Removing And Installing Or Replacing Inside Door Opener In Left Or Right Front D > < 11 RA Removing And Installing Or Replacing Outside Handle From Left Or Right Front Doo