7 Series E65 750i (N62TU) SAL
![background image](/bmw/7_Series_E65/750i_N62TU_SAL/page-1250001.png)
61 71 100
Removing and installing/replacing windshield
washer pump
Note:
Drain fluid reservoir for windshield washer system
Remove front underbody protection.
Detach front left wheel arch trim in front area and fold back.
Remove bottom left cover.
Disconnect plug connection (1).
Detach hose (2) from windshield washer pump (3).
Pull windshield washer pump (3) up and out of fluid reservoir for
windshield washer system (4).
Installation:
Replace strainer for windshield washer pump.
If necessary, coat sealing ring of windshield washer pumps with
antiseize agent.
Ensure hose is laid without kinks.
RA Removing and installing/replacing windshield washer pump
BMW AG - TIS
16.02.2013 14:04
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -