7 Series E65 760i (N73) SAL
17 21 200
Removing and installing/replacing engine oil
cooler (N73)
Necessary preliminary tasks:
•
Remove design cover
•
Remove center front panel
•
Remove radiator cover
Recycling:
Catch and dispose of emerging engine oil.
Observe country-specific waste-disposal regulations.
Unscrew bolt (1).
Remove both lines in direction of arrow.
Installation:
Replace O-rings.
Remove engine oil cooler (2) in direction of arrow.
Assemble vehicle.
Check engine oil and top up if necessary.
RA Removing and installing/replacing engine oil cooler (N73)
BMW AG - TIS
18.02.2013 12:30
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -