7 Series E66 730Li (N52) SAL
17 00 039
Venting cooling system and checking for
leaks (N52)
Warning!
Danger of scalding!
Open sealing cap only after engine has cooled down.
Important!
Electric coolant pump!
Only when refilling!
Important!
Do not fill coolant expansion tank over MAX level as overfilling
will cause the coolant to overflow. This may give rise to traces
of residual coolant on the expansion tank or in the engine
compartment and wrongly suggest possible leakages.
Only when refilling!
Use only recommended coolant.
Perform filling operation slowly.
Adjust coolant level to MAX.
Close coolant expansion tank.
Important!
The following venting procedure is necessary e.g. when a part
is replaced in the cooling system or when the cooling system
is refilled.
RA Venting cooling system and checking for leaks (N52)
BMW AG - TIS
07.02.2013 00:35
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -