7 Series E66 730Li (N52) SAL
22 11 100
Replacing right engine support arm (N52)
Necessary preliminary tasks:
•
Secure engine in installation position
•
Remove reinforcement plate
•
Observe safety instructions on raising the vehicle
Release screw (1) on both engine mounts from above.
Tightening torque 22 11 2AZ
.
Release nut (2) and remove grounding strap from engine support
arm.
Installation:
Clean contact surfaces to ensure a safe ground connection.
Release screws and remove engine support arm (1).
Tightening torque and angle of rotation 22 11 3AZ
.
Installation:
Replace aluminium screws.
RA Replacing right engine support arm (N52)
BMW AG - TIS
07.02.2013 00:46
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -