7 Series E66 730Li (N52) SAL
Necessary preliminary tasks:
•
Disconnect battery
•
Remove reinforcement plate
•
Remove front engine underguard
•
Remove complete exhaust system
Remove heat shields (1) and (2).
Release screws and remove transmission underbody
protection (1).
Unfasten nut.
Remove cable (1).
Installation:
Adjust cable.
-
Release nut
-
Adjust cable by means of holder (2)
-
Spacing A = 1 mm
RA Removing and installing automatic transmission (6HP19Z/N52)
BMW AG - TIS
07.02.2013 00:54
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -