7 Series E66 730Li (N52) SAL
51 22 170
Removing and installing / replacing outside
handle on left or right back door
Special tools required:
•
00 9 318
•
51 3 252
Lever out plugs (1 and 2) with special tool
00 9 318 .
Tape off area around bore and door seal with fabric adhesive tape
(risk of damage).
Installation:
If necessary, fit new plugs.
Important!
Do not bend lockplate (2) too far inwards (risk of damage).
Unlocking outside door handle:
•
Insert special tool 51 3 252 into hole (1) of lockplate (2).
•
Lift lockplate (2) inwards out of guide (3) and push forwards
as far as it will go.
Installation:
Insert special tool 51 3 252 into hole (1) of lockplate (2)
and pull towards rear as far as it will go.
Perform function check:
•
Push lockplate (2) forwards again slightly until
resistance can be felt.
•
Outside door handle must be locked.
RA Removing and installing / replacing outside handle on left or right back door
BMW AG - TIS
07.02.2013 17:47
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -