7 Series E66 730Li (N52) SAL
51 47 000
Removing and installing / replacing entrance
cover strip, front (inside) left or right
Detach entrance cover strip (1) from front and rear trims.
Unclip entrance cover strip (1) in direction of arrow from floor
plate.
If necessary, lever clips (2) with end cutting pliers (head of pliers
surface-ground) out of floor pan.
Installation:
Clip mounts of entrance cover strip (2) must not be damaged.
Push clips (1) onto entrance cover strip (2).
If necessary, replace faulty clips (1).
RA Removing and installing / replacing entrance cover strip, front (inside) left or
BMW AG - TIS
07.02.2013 18:54
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -