7 Series E66 730Li (N52) SAL
Version A (water jet hose connected):
Disconnect plug connection (1).
Important!
Risk of damage!
At low outside temperatures, carefully heat water jet hose (3)
in area of distributor (2) with hot air blower.
Turn water jet hose (3) and pull off in direction of arrow.
Slacken nut (4).
Version B (quick-release coupling):
Note:
Windscreen wiper arm shown removed for purposes of clarity.
For releasing, push slide (2) of quick-release in direction of arrow
until it snaps audibly into place.
Pull off hose (1).
Disconnect associated plug connection and release nut.
Important!
Risk of breakage!
Do not bend windscreen wiper arm when removing.
Detach windscreen wiper arm with special tool 61 6 060 .
Pull off adjusting disc (1) with special tool
61 6 060 .
RA Removing and installing (replacing) left windscreen wiper arm (driver's side)
BMW AG - TIS
07.02.2013 21:28
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -