7 Series E66 730Li (N52) SAL
63 21 310
Replacing circuit board for left or right rear
light (up to 03/2005) (on rear lid)
Necessary preliminary tasks:
•
Remove rear light
Detach sealing frame for rear light (1) in direction of arrow.
Release screws (2).
Remove cover cap of rear light (4) from rear light (3).
Installation:
Make sure seal (1) is correctly seated in cover cap of rear
light (2).
Disconnect plug connections (1).
Release screws (2).
Remove circuit board for rear light (3) from rear light (4).
RA Replacing circuit board for left or right rear light (up to 03/2005) (on rear li
BMW AG - TIS
07.02.2013 22:00
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -