7 Series E66 730Li (N52) SAL
Release screws (1).
Detach refrigerant lines (2) in direction of arrow.
Installation:
Replace sealing rings and moisten with refrigerant oil.
Observe tightening torque, 64 52 1AZ
.
Unscrew nut (3).
Unscrew nuts (1).
Remove compensating shims (2).
Installation:
Make sure compensating shims (2) are in correct installation
position.
Tighten nuts (1) to specified torque: Tightening torque
64 11 5AZ
.
Unfasten plug connection (1) and disconnect.
Release nuts (2) slightly.
Pull out condensate drain (3) in direction of arrow.
Installation:
Make sure condensate drain (3) is correctly seated.
Lift off air ducts (1) and pull out.
Installation:
Make sure air ducts (1) are correctly seated.
Pull out rear air conditioner (2) together with cooler box (3) in
direction of arrow.
RA Removing and installing rear air conditioner (with cooler box)
BMW AG - TIS
07.02.2013 22:23
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -