7 Series E66 730Li (N52) SAL
Cut through cable tie (1).
Disconnect plug connections (2).
Release screw (1).
Release clips (2).
Remove distributor housing (3) in direction of arrow.
Installation:
Make sure sealing frame (1) is correctly seated in groove of
distributor housing (2).
If necessary, replace sealing frame (1).
Pull evaporator for rear air conditioner (1) in direction of arrow out
of rear air conditioner housing (3).
Installation:
Make sure grommet (2) is correctly seated in rear air conditioner
housing (3).
RA Removing and installing/replacing evaporator for rear air conditioner
BMW AG - TIS
07.02.2013 23:22
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
