7 Series E66 735Li (N62) SAL
Note:
Illustration with engine removed.
Detach hose (1) on check valve (2).
E65 only:
Release screws (3).
Remove tube (4) with check valve (2).
Note:
Do not remove guide tube (5) for oil dipstick.
Installation:
Replace sealing ring on tube (4) and coat with antiseize agent.
Removal:
Removal of cylinder head is described separately from installation.
Remove inlet and exhaust adjustment unit on left side.
Note:
Illustration with engine removed.
Remove eccentric shaft sensor (2).
Detach guide rail from cylinder head.
RA Removing and installing left cylinder head (N62 from 9/03 and N62TU)
BMW AG - TIS
08.02.2013 17:14
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -