7 Series E66 735Li (N62) SAL
11 31 032
Removing and installing/replacing left inlet
camshaft (N62 to 9/03)
Special tools required:
•
11 9 470
•
11 9 472
•
11 9 473
•
11 9 474
•
11 9 475
•
11 9 480
•
11 9 490
(cylinder bank 5 to 8)
Removal
Removal of inlet camshaft is described separately from
installation.
Remove servomotor for left eccentric shaft.
Remove ignition coils on cylinder bank 5 to 8.
Remove left cylinder head cover.
Remove spark plugs on cylinder bank 5 to 8.
Remove inlet and exhaust adjustment unit on left side.
Important!
The inlet camshaft must first be rotated so that when the
bearing bracket is removed the intermediate levers do not slip
out and damage the camshaft.
RA Removing and installing/replacing left inlet camshaft (N62 to 9/03)
BMW AG - TIS
08.02.2013 17:33
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
