7 Series E66 735Li (N62) SAL
11 37 008
Removing and installing/replacing right
eccentric shaft (N62 from 9/03 and N62TU)
(cylinder bank 1 to 4)
Necessary preliminary tasks:
•
Remove servomotor for right eccentric shaft
•
Remove ignition coils on cylinder bank 1 to 4
•
Remove spark plugs on cylinder bank 1 to 4
•
Remove right cylinder head cover
•
Remove right inlet and exhaust adjustment units
•
Remove right inlet camshaft
Eccentric shafts from 2/2003:
Note:
Eccentric shafts of cylinders 1 to 4 and 5 to 8 are identical
parts.
Important!
Note installation direction of eccentric shafts.
Depending on the side on which the magnet wheel is fitted,
the eccentric shafts are used for cylinders 1 to 4 or
5 to 8.
Incorrect assembly will result in engine damage.
Removal:
Removal of eccentric shaft is described separately from
installation.
RA Removing and installing/replacing right eccentric shaft (N62 from 9/03 and N62TU
BMW AG - TIS
08.02.2013 17:54
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
