7 Series E66 735Li (N62) SAL
11 37 022
Removing and installing/replacing
servomotor for left eccentric shaft
(N62/N62TU)
Important!
Follow instructions issued by diagnosis tester.
Risk of damage to intermediate shaft.
(cylinder bank 5 to 8)
Necessary preliminary tasks:
•
Connect diagnosis tester.
•
Remove acoustic cover
•
Remove ignition coil cover
Important!
Follow instructions issued by diagnosis tester.
Unlock plug (1) on servomotor (2) and disconnect.
RA Removing and installing/replacing servomotor for left eccentric shaft (N62/N62TU
BMW AG - TIS
08.02.2013 17:57
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
