7 Series E66 735Li (N62) SAL
Disconnect plug.
Pull out ignition coil (2).
This procedure is applicable to all ignition coils.
Installation:
Insert rubber seal on ignition coils (2) between guides.
Note:
Read out fault memory of DME control unit.
Check stored fault messages.
Rectify faults.
Now clear the fault memory.
RA Replacing ignition coil (N62)
BMW AG - TIS
08.02.2013 18:21
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
