7 Series E66 735Li (N62) SAL
12 90 100
Replacing fan for electronics box (N62)
Note:
Read and print out fault memory with MoDiC or BMW DIS.
Switch off ignition.
Follow instructions for disconnecting and connecting battery.
Disconnect battery.
Caution!
Follow instructions for removing and installing electronic
control units.
Remove fresh air duct.
Release screw and remove holder (1).
Release screws and remove cover (2) from control unit box.
Note:
Release screws on seal (3) only when removing wiring harness.
Installation:
Insert tabs (1) in openings (2) and close cover.
Unlock plug connections on Valvetronic control unit (1),
DME control unit (2) and integrated supply module (3) and
detach.
Remove Valvetronic control unit (1), DME control unit (2) and
integrated supply module (3).
Unlock plug connection on fan for electronics box and detach.
Release both screws on control unit carrier and remove towards
top.
RA Replacing fan for electronics box (N62)
BMW AG - TIS
08.02.2013 18:40
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -