7 Series E66 735Li (N62) SAL
17 11 370
Removing and installing/replacing cooling
loop for power steering
Remove design cover.
Remove fan clutch.
Remove fan cowl.
Remove front underbody protection.
Recycling:
Catch and dispose of hydraulic fluid.
Observe country-specific waste-disposal regulations.
Draw off hydraulic fluid.
Installation:
Top up hydraulic fluid.
Bleed power steering.
Check fluid level in power steering fluid reservoir; top up if
necessary.
Unlock connection (1) on left and detach.
Unlock connection (1) on right and detach.
RA Removing and installing/replacing cooling loop for power steering
BMW AG - TIS
08.02.2013 19:09
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
