7 Series E66 735Li (N62) SAL
32 34 030
Removing and installing / replacing airbag
unit (sport steering wheel)
Warning!
Observe the following instructions to avoid any risk of injury by
the airbag unit.
-
Comply with safety regulations for handling components
with gas generators.
-
Do not exert any force on the airbag unit.
-
Use only specified tools for releasing the airbag unit.
Note: Incorrect handling may result in triggering of the airbag
unit and thereby cause serious injury.
Important!
Steering wheel must be replaced if airbag unit has been
triggered!
Follow procedure after airbag triggering.
Necessary preliminary tasks:
•
Disconnect battery negative lead
Insert a suitable tool (1) (approx. 6 mm dia.) (e.g. pin punch,
Torx screwdriver) through bore holes (2) in steering wheel until a
springy resistance can be felt through annular spring (3) of airbag
unit.
Unlock airbag unit by pressing screwdriver (1) in.
Installation:
Align airbag unit with steering wheel and press in.
Do not pinch wires.
RA Removing and installing / replacing airbag unit (sport steering wheel)
BMW AG - TIS
08.02.2013 20:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
