bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

ABOUT US
12 RA Removing And Installing Vane Pump (N62, N62TU) For Power Steering (from 10_2003) > < 11 RA Removing And Installing Vane Pump (N62) For Power Steering (up To 10 _ 2003)

7 Series E66 735Li (N62) SAL

Page 2
background image

Unscrew nut (2).

Installation:

1. 

Tighten knurled stud (1) hand-tight against housing of vane

pump

2. 

Tighten down front bolts

Tightening torque 32 41 1AZ

.

3. 

Replace self-locking nut (2) and tighten down

Tightening torque 32 41 1AZ

.

Unfasten screws.

Tightening torque 32 41 1AZ

.

Remove vane pump.

RA  Removing and installing vane pump (N62) for power steering (up to 10 / 2003)

BMW AG - TIS

08.02.2013  20:53

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 2 -

12 RA Removing And Installing Vane Pump (N62, N62TU) For Power Steering (from 10_2003) > < 11 RA Removing And Installing Vane Pump (N62) For Power Steering (up To 10 _ 2003)