7 Series E66 735Li (N62) SAL
33 31 503
Lowering/raising rear axle carrier
Special tools required:
•
00 2 040
•
33 3 274
•
33 4 227
•
33 4 228
Important!
Observe safety instructions on raising the vehicle.
Adhere to the utmost cleanliness. Do not allow any dirt to
enter the hydraulic system.
Seal off pipe connections with plugs.
Necessary preliminary tasks:
•
Remove rear wheels
•
Version with ride-height control: Deactivate and empty air
spring system
•
Remove brake disc on both sides
•
Disconnect parking brake Bowden cable on both sides from
expander lock
•
Remove complete exhaust system
•
Partially remove thermal insulation
•
Detach plug connection for pulse generator on both sides
and expose line up to control arm
•
Detach plug connection for brake pad wear sensor on right
and expose line up to control arm
•
If necessary, disconnect plug connections at ride-height
sensors
•
Remove spring strut shock absorber/air spring strut on both
sides from wheel carrier
RA Lowering/raising rear axle carrier
BMW AG - TIS
08.02.2013 21:19
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
