7 Series E66 735Li (N62) SAL
33 32 125
Replacing a ball joint in lower steering
knuckle / wheel carrier
Special tools required:
•
33 3 333
•
33 4 191
•
33 4 192
•
33 4 193
•
33 4 194
Necessary preliminary tasks:
•
Remove push rod/integral link
•
Remove stabilizer link on both sides from swinging arm
•
Remove spring strut/air spring strut from wheel carrier
Reconditioning special tool:
Cut highlighted area out of special tool 33 4 191 and then
deburr.
Lift out retaining ring (1).
Pull out ball joint with special tools 33 4 193 , 33 4 191 ,
33 4 192 and 33 3 333 . Slotted side of special tool
33 4 191 must point to wheel carrier.
Installation:
Install new circlip (1).
RA Replacing a ball joint in lower steering knuckle / wheel carrier
BMW AG - TIS
08.02.2013 21:22
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -