7 Series E66 735Li (N62) SAL
If necessary, remove support pot, auxiliary damper (1) with
protective tube and spring pad (2) from shock absorber.
Relieve tension on coil spring and remove from special tools
31 3 357 .
Assembly:
Accommodate coil spring with special tools 31 3 357 in such a
way that both ends of coil spring are approx. one coil (W) outside
special tools 31 3 357 .
Warning!
Do not compress coil spring to full extent.
Coils of coil spring must be located completely in recesses of
special tools 31 3 357 !
Tension coil spring.
RA Replacing rear left or right spring strut shock absorber
BMW AG - TIS
08.02.2013 21:31
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -