7 Series E66 735Li (N62) SAL
Installation:
Mount control unit as follows on hydraulic unit:
-
Press control unit onto hydraulic unit.
-
Insert screws (1) and (2) (do not tighten down) until control
unit rests evenly.
-
Provisionally fit screws (3...6).
-
Tighten down screws (1...6) in specified sequence.
Tightening torque 34 51 1AZ
.
RA Removing and installing / replacing DSC control unit
BMW AG - TIS
08.02.2013 22:08
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -