7 Series E66 735Li (N62) SAL
Open weld spots in area (1).
Open laser weld seams in area (2).
Important!
Observe special procedure when opening laser weld seams.
Release adhesive areas (layout, see next operation) and remove roof outer skin.
Installation:
Fit new part on body. Fit windshield for positioning.
Laser weld seams are replaced by plug welds.
Seal weld seams with sealing compound.
RA Replacing roof outer skin (version with slide/tilt sunroof)
BMW AG - TIS
08.02.2013 23:20
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -