7 Series E66 735Li (N62) SAL
41 34 038
Replacing outer section of tail panel
Read contents of Body, General.
Spot-weld bonding is used for the first time on the E65. A
specific procedure must be followed here.
Following new body parts are required (refer to EPC):
-
Rear trim outer skin
Open weld joints in area (1).
Release bond in areas (2) with hot air blower.
Installation:
Apply adhesive in areas (2).
RA Replacing outer section of tail panel
BMW AG - TIS
08.02.2013 23:21
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
