7 Series E66 735Li (N62) SAL
51 11 050
Removing and installing / replacing carrier for
front bumper trim
Necessary preliminary tasks:
•
Remove front bumper trim
Build date from 03/2005:
•
Remove both lower brackets for headlight mounting
Not build date from 03/2005:
Release screw (1).
Remove upper air duct section (2) on left/right.
Remove impact absorber (2) towards front.
Release screws (1) and remove bracket/rod.
Disconnect plug connection on fanfare horn on left/right
If necessary, disconnect plug connection on ACC sensor and
night vision camera.
Replacement:
Release screw (3) on left/right and remove fanfare horn.
Release catches (1).
Remove cover (2) on left/right.
RA Removing and installing / replacing carrier for front bumper trim
BMW AG - TIS
08.02.2013 23:46
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
