7 Series E66 735Li (N62) SAL
Place exhaust cover (1) on bumper trim (2), align and stick
down.
Remove emerging adhesive immediately.
Secure exhaust cover (1) with yellow plastic adhesive tape.
Secure exhaust cover (1) in area (A) to bumper trim (2) with
blind rivets.
If necessary, drill out bumper trim (2).
RA Replacing rear bumper trim
BMW AG - TIS
08.02.2013 23:53
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
