7 Series E66 735Li (N62) SAL
Lever out retainers (1 to 3) from trim strip (6).
Installation:
Clip black retainers (1) into bores on trim strip (6).
A
Direction of travel, front
2
Black retainers
3
White retainers (E65), black retainers (E66)
Rubber on retainers (2 and 3) must not be damaged or missing.
For position of retainers (2 and 3), refer to next work step.
Installation:
Attach retainers (2 and 3) at distance (B) from hole (7).
A
Direction of travel, front
B = 25 mm
Bore (7) for white retainers (3) is approx. 715 mm further back.
Lever out white retainer (4) from trim strip (6).
Installation:
Clip white retainer (4) into bore on trim strip (6).
A
Direction of travel, front
All retainers must be removed in order for seal (5) to be removed.
Glue moulded part of seal (5) to trim strip (6) with Loctite 454
(sourcing reference: BMW Parts Service).
Coat remainder of sealing channel of seal (7) with antiseize
agent (50 % water / 50 % washing-up liquid).
Fit seal (7) and press into end position with special tool
00 9 321 (fishbone).
Fit seal (8) without antiseize agent in compressed state.
A
Direction of travel, front
RA Replacing trim strip on roof frame at left or right
BMW AG - TIS
09.02.2013 00:02
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
