7 Series E66 735Li (N62) SAL
51 24 050
Removing and installing/replacing lock
element (lock cylinder) for rear lid (up to
03/2005)
Necessary preliminary tasks:
•
Remove rear centre trim
Detach cover (1) from lock element (2).
Disconnect Bowden cable (3) from element (4).
Installation:
Retainer (5) must be correctly fitted.
Version with manual unlocking:
Release screw (1).
Slide Bowden cable with holder (2) to one side.
RA Removing and installing/replacing lock element (lock cylinder) for rear lid (up
BMW AG - TIS
09.02.2013 01:09
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -