7 Series E66 735Li (N62) SAL
51 49 006
Removing and installing/replacing trim for
rear lid at top
Necessary preliminary tasks:
•
Remove trim for rear lid at bottom.
Release screws (1 and 2).
Lever out retaining strap and remove tool box (3) in direction of
arrow.
Release clips (1) and remove trim (2).
Installation:
Following parts of trim (3) must not be damaged or missing:
1
Clips
2
Clip mountings
RA Removing and installing/replacing trim for rear lid at top
BMW AG - TIS
09.02.2013 02:21
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -