7 Series E66 735Li (N62) SAL
51 71 387
Removing and installing/replacing rear water
gutter trim (rear lid) on left or right
Lever out expansion rivet (3).
Detach rubber seal (2).
Slide trim (1) towards rear and remove.
Installation:
Make sure trim (1) is correctly located in cover (2).
Trim (1) must engage catch (4) in side panel at rear (3).
Caution!
If clip fixture (1) is removed for further work (e.g. painting):
Always replace clip fixture (1) in order to prevent leaks.
RA Removing and installing/replacing rear water gutter trim (rear lid) on left or r
BMW AG - TIS
09.02.2013 02:25
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -