7 Series E66 735Li (N62) SAL
61 35 285
Removing and installing (replacing) light
module
Necessary preliminary tasks:
•
Disconnect battery negative lead
•
Remove trim panel for pedal assembly.
Release screw (1).
Remove left footwell air duct (2) in direction of arrow.
Installation:
Make sure left footwell air duct (2) is correctly seated.
Release screw (1).
Feed out light module (2) in direction of arrow.
Disconnect plug connection (1) and remove light module (2).
RA Removing and installing (replacing) light module
BMW AG - TIS
09.02.2013 04:33
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -