7 Series E66 735Li (N62) SAL
64 11 274
Replacing water valve for heater (automatic
A/C High)
Warning!
Danger of scalding!
Only perform this work after engine has cooled down.
Disconnect plug connection (1).
Installation:
Ensure correct cable routing.
Pull out heater valve (2) upwards slightly.
Release hose clamps (1) and detach water hoses.
Remove water valve for heater (2).
Installation:
Make sure water valve (1) is correctly seated in grommets (2)
and rubber mount (3).
If necessary, replace grommets (2) and rubber mount (3).
Filling and bleeding the cooling system,
RA Replacing water valve for heater (automatic A/C High)
BMW AG - TIS
09.02.2013 05:48
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
