7 Series E66 735Li (N62) SAL
Carefully lever out cover (1) with special tool 64 1 020 at
marked areas.
Disconnect plug connection.
Installation:
Remove coarse adhesive residues from adhesive area of cooler
box and degrease with adhesive cleaner (refer to BMW Parts
Service).
Make sure button and cover (1) are correctly installed.
Press down cover (1) evenly.
RA Removing and installing/replacing cooler box button
BMW AG - TIS
09.02.2013 05:52
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
