7 Series E66 735Li (N62) SAL
64 11 946
Replacing evaporator temperature sensor for
rear A/C system
Necessary preliminary tasks:
•
Remove panel for luggage compartment partition.
Disconnect plug connection (1).
Pull evaporator temperature sensor (2) in direction of arrow (to
left) out of rear air conditioner housing (3).
Installation:
Make sure evaporator temperature sensor (2) is correctly seated
in rear air conditioner housing (3).
RA Replacing evaporator temperature sensor for rear A/C system
BMW AG - TIS
09.02.2013 06:11
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
