7 Series E66 735Li (N62) SAL
64 51 514
Replacing valve for rear A/C system
Necessary preliminary tasks:
•
Draw off refrigerant from A/C system.
•
Remove expansion valve cover.
Unlock plug connection (1) and disconnect.
Press housing half (2) upwards slightly with a suitable
screwdriver (3).
Feed out cable (4) in direction of arrow.
Installation:
Make sure housing half (2) is correctly seated on housing.
Unscrew nuts (1).
Release screw (2) slightly.
Pull out valve for rear A/C system (3).
Installation:
Replace sealing rings.
RA Replacing valve for rear A/C system
BMW AG - TIS
09.02.2013 06:40
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
