7 Series E66 735Li (N62) SAL
64 51 527
Removing and installing/replacing expansion
valve (with rear A/C system)
Warning!
Risk of injury!
Refrigerant circuit is under high pressure!
Follow safety instructions for handling R 134a refrigerant .
Avoid contact with refrigerant and refrigerant oil.
Follow safety instructions for handling refrigerant oil.
Important!
Risk of damage!
Restart engine only when A/C system has been correctly
filled.
Follow instructions for opening and replacing parts in
refrigerant circuit.
If A/C system is opened for more than 24 hours:
Replace desiccant insert for A/C system
Necessary preliminary tasks:
•
Drawing off, evacuating and filling the A/C system is not
included in the time value for this operation
•
Remove expansion valve cover
•
Remove trim in centre console at front left
Remove foam cover (1) in direction of arrow.
Expose screw heads (2).
RA Removing and installing/replacing expansion valve (with rear A/C system)
BMW AG - TIS
09.02.2013 06:41
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -