7 Series E66 735Li (N62) SAL
Release screws (1).
Installation:
Do not mix up plug connections (3) and (4).
Unlock plug connections (2), (3) and (4) and disconnect.
Feed out control unit for rear compartment monitor (5) in direction
of arrow and set down.
Unlock plug connection (1) and disconnect.
Remove control unit for rear compartment monitor (2).
Replacement:
Carry out coding/programming.
Observe following IDC specifications:
•
Programming
•
Coding
•
Car & Key Memory
•
CD "CIP"
RA Replacing control unit for rear compartment monitor
BMW AG - TIS
09.02.2013 07:20
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -