7 Series E66 735Li (N62) SAL
65 77 730
Removing and installing (replacing) vehicle
center sensor
Warning!
Note airbag safety instructions!
Incorrect handling can activate airbag and cause injury.
Note:
Follow instructions for handling optical fibers.
Necessary preliminary tasks:
•
Disconnect battery negative lead and cover.
•
Remove center armrest.
Unfasten plug connection (1) and disconnect.
Release screws (2) and remove vehicle center sensor (3).
Installation:
Tightening torque 65 77 6AZ
.
Make sure sensor is mounted without play.
RA Removing and installing (replacing) vehicle center sensor
BMW AG - TIS
09.02.2013 07:29
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
