7 Series E66 735Li (N62) SAL
Removing:
If fitted, release catches (4) with special tool 00 9 322 .
Installation:
Following parts of cover (7) must not be damaged or missing:
1
Catches
2
Spring
3
Release button
4
Catches
5
Guides
6
Catches
Caution!
Do not under any circumstances touch circuit board (2) with
hands (risk of damage).
Using special tool 00 9 341 , unlock insert (1) and pull out
slightly in direction of arrow.
Caution!
Do not under any circumstances touch circuit board (2) with
hands (risk of damage).
Disconnect plug connection (1).
Remove insert (3).
Installation:
Ribbon cable (1) must be laid in guide (3).
Stop (4) and damper (5) must not be damaged.
RA Removing and installing/replacing eject box (cordless keypad handset)
BMW AG - TIS
09.02.2013 08:38
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -