bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

ABOUT US
3 RA Removing And Installing Left Cylinder Head (N62 From 9_03 And N62TU)|Page 327 > < 3 RA Removing And Installing Left Cylinder Head (N62 From 9_03 And N62TU)

7 Series E66 745Li (N62) SAL

Page 2
background image

Note:

Illustration with engine removed.

Detach hose (1) on check valve (2).

E65 only:

Release screws (3).

Remove tube (4) with check valve (2).

Note:

Do not remove guide tube (5) for oil dipstick.

Installation:

Replace sealing ring on tube (4) and coat with antiseize agent.

Removal:

Removal of cylinder head is described separately from installation.

Remove inlet and exhaust adjustment unit on left side.

Note:

Illustration with engine removed.

Remove eccentric shaft sensor (2).

Detach guide rail from cylinder head.

RA  Removing and installing left cylinder head (N62 from 9/03 and N62TU)

BMW AG - TIS

11.02.2013  06:33

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 2 -

3 RA Removing And Installing Left Cylinder Head (N62 From 9_03 And N62TU)|Page 327 > < 3 RA Removing And Installing Left Cylinder Head (N62 From 9_03 And N62TU)