7 Series E66 745Li (N62) SAL
11 28 050
Replacing A/C compressor drive belt with belt
tensioner (N62/N62TU)
Special tools required:
•
11 3 340
Necessary preliminary tasks:
•
Remove alternator drive belt
•
Remove engine splash guard.
Note:
If the drive belt is to be reused:
Mark direction of travel and reinstall drive belt in same
direction of travel.
Pretension belt tensioner slowly and carefully with a Torx socket
as far as it will go and secure with special tool 11 3 340 .
Remove drive belt.
Important!
If contaminated with hydraulic fluid: Replace drive belt.
Put on the drive belt.
Remove special tool 11 3 340 .
Installation:
Check that drive belt is correctly positioned on pulleys.
RA Replacing A/C compressor drive belt with belt tensioner (N62/N62TU)
BMW AG - TIS
11.02.2013 06:51
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -