7 Series E66 745Li (N62) SAL
Note:
Bearing caps are marked as illustrated with R E2 to R E5.
Fit bearing caps R E2 to R E5.
Note:
Initially tighten special tool 11 9 473 without play only.
Secure bearing bracket and bearing cap with nut (special tool
11 9 473 ).
Note:
The mounting of the bearing bracket described later can only be
performed if the first bearing of the inlet camshaft is aligned with
special tool 11 9 472 .
Fit special tool 11 9 472 as shown in illustration and align inlet
camshaft.
Fit centering sleeves (special tool 11 9 475 ) and align special
tool 11 9 472 to bearing caps 2 and 3.
RA Removing and installing/replacing left inlet camshaft (N62 to 9/03)
BMW AG - TIS
11.02.2013 06:52
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 10 -
