7 Series E66 745Li (N62) SAL
Installation:
Replace O-rings (1 and 2) on solenoid valve (3) and lubricate.
Installation:
Press in solenoid valves as far as they will go.
Make sure holders are in correct installation positions.
Install and tighten down screws.
Now clear the fault memory.
RA Removing and installing/replacing both right solenoid valves (N62/N62TU)
BMW AG - TIS
11.02.2013 07:11
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -