bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

3 RA Replacing Fan Cowl (N62) > < 1 RA Removing Design Cover (N62)
Page 1
background image

17 11 000

Removing and installing radiator (N62)

Warning!

Danger of scalding!

Only perform this work after engine has cooled down.

Follow instructions for working on cooling system.

Remove fan cowl.

Remove front underbody protection.

Drain coolant.

Detach heat exchanger for automatic transmission from radiator.

Unlock and detach all coolant hoses on radiator.

Remove radiator (1) towards top.

Installation:

Ensure correct seating in side guides.

Top up coolant.

Vent cooling system and check for leaks.

RA  Removing and installing radiator (N62)

BMW AG - TIS

11.02.2013  08:26

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

3 RA Replacing Fan Cowl (N62) > < 1 RA Removing Design Cover (N62)